Arburg 520 C 2000-675 2x injection molding machines for sale

DESCRIPTION

Manufacturer: Arburg GmbH + Co KG in Germany
Model: 520 C 2000-675
Year of manufacture: 2000
Number of operating hours: 65837 pump/52246 automatic operation
Line consists of: 2x injection molding machines
 
Technical data of the 1st injection molding machine:
Current type: 3  ̃
Voltage: 400 V/230 V/24 V
Frequency: 50 Hz
Rated current of motor head: 78,0/22,3 A
Total rated current: 100,00 A
Total connected load: 58,0 kW
Machine was serviced by „Arburg”
The original spare parts from “Arburg” were used in each case
Plasticizing cylinder in highly wear-resistant design and fifties screw
Nozzle tip with the flat nozzle 0 degrees and the nozzle hole 4 mm
The injection molding machine is equipped with a slewing crane with the maximum jib of 650 kg. If required, the crane lifting unit (crane inspection certificate available until August 2023) can be supplied with the machine
Conversion from 3,5 floppy disc to CF-drive with the latest operating software
The injection molding machine has a hydraulic core pull. The connection is on the operator side
Moving platen is controlled by the machine
Blow out unit controlled by 3/2 valve through the injection molding machine
The connection for “Multilift Select” or “Euromap” is possible
Alternatively, the machine can be controlled by an external hot runner control unit (2 connections for 24-pin mixing cable according to “Strack Norm”)
 
Technical data of the 2nd injection molding machine:
The machine is identical in construction only with extended clamping program
 
Condition: Functional
 
Availability: Immediately. The injection molding machines can be inspected on site at any time during operation.
 
Reference: PRO4028

Buy used Arburg 520 C 2000-675 2x injection molding machines

Similar offers