3 + 1-axis horizontal machining center with 2-fold pallet changer
This is a prototype machine developed by Hynday. This was operated only for test purposes and a trade fair appearance. The machine is fully functional and shows no signs of wear and only minor signs of using.
Operating and spindle hours: <100 h
Specifications:
- Main spindle (manufacturer GMN):
max. Speed: 10,000 rpm
max. Torque (S1 / S6): 450/570 Nm
max. Power (S1 / S6): 47/60 kW
Tool interface: SK50
- Axis travel:
X: 1050 mm
Y: 900 mm
Z: 1000 mm
- Rapid / Acceleration:
X / Y / Z: 60 m / min; 1g
- Pallet size: 630 x 630 mm
- max. Workpiece height: 1300 mm
- max. Workpiece diameter: 1050 mm
- Max. Table load: 1500 kg
- Rotary table (manufacturer Peiseler ATHN 520)
max. Speed: 30 rpm
angular pitch: 1 °
rotary distributor: 6 channels
- tool magazine:
number of places: 40
max. Tool length: 630 mm
max. Tool diameter: 125 mm (full assembly); 320 mm (with free neighbor places)
max. Tool weight: 20 kg
- Control: Siemens 840Dsl
- chip conveyor and KSS system (Knoll manufacturer):
conveyor belt conveyor
KSS system with high pressure pump for IKZ (20,7 l / min, 120 bar), AKZ pump (300 l / min ; 2.8 bar), bed rinse pump (200 l / min; 2.3 bar)
paper tape filter
Specifications:
Voltage 400 V, 50 Hz
Rated Power 145 kVA
Full Load Current 230 A
Spindle Speed max 10,000 min-1
Ultimate Breaking Capa. 120 kA
Service Breaking Capa. 100 kA
Produced Date 07/2015
Dimensions of the machine with all peripherals, with operator platform (with set-up platform) are 6000 × 9500 (10,700) mm depending on the setup (W × L).
Total weight is about 21,000 kg, excluding KSS system, chip conveyor, system cooler and pedestals.
Original price: 300 000 euros
